4. Gently press and slide the paper width guides (1) to fit the paper size, and then lift the stopper (2).
5. Close the output paper tray cover.
6. Load up to 20 sheets of photo paper with the printing surface face down.
Loading more than 20 sheets of photo paper may cause paper jams.
7. Lift the output paper tray cover.
8. Gently adjust the paper width guides (1) to fit the paper.
Make sure the paper width guides touch the edges of the paper and the paper is flat in the tray.
9. Close the output paper tray cover.
30
To Next Page
Loading...
Need help?
General