3
g Close the output paper tray cover.
h Slowly push the paper tray completely into the
machine.
i While holding the paper tray in place, pull out
the paper support a until it clicks, and then
unfold the paper support flap b.
3
Connect the power cord
a Connect the power cord.
The machine must be fitted with an earthed
plug.
4
Choose your language
a
Press
a
or
b
to choose your language and press
OK.
b Press a or b to choose Yes or No and press
OK.
DO NOT connect the USB cable yet (if you are
using a USB cable).
The Warning LED on the control panel will stay on
until you have installed the ink cartridges.
If you set the wrong language, you can change
the language after setting the date and time.
(For details, see Changing LCD language in
chapter 1 in the Advanced User’s Guide on the
documentation CD-ROM.)
To Next Page
Loading...
