Brother DCP-J725DW - Connect the Power Cord; Install the Ink Cartridges; Choose Your Language

4
3
Connect the power cord
WARNING
The machine must be fitted with an earthed
plug.
a Connect the power cord.
4
Choose your language
a Press s or t to display your language and
press the desired language.
b Press Yes or No.
5
Install the ink cartridges
CAUTION
If ink gets in your eyes, wash it out with water at
once and call a doctor if you are concerned.
a Make sure that the power is turned on.
The LCD will show No Ink Cartridge.
b Open the ink cartridge cover a.
c Remove the orange protective part a.
IMPORTANT
DO NOT connect the USB cable yet (if you are
using a USB cable).
Note
The Warning LED on the control panel will stay on
until you have installed the ink cartridges.
Note
If you set the wrong language, you can change it
after setting the date and time. (uuAdvanced
User’s Guide: Changing LCD language)
Note
Make sure you install the Introductory ink
cartridges included with your machine first.
Note
Do not throw away the orange protective part.
You will need it if you transport the machine.
1
1