Level 1 Level 2 Level 3 Level 4 Descriptions
WLAN
(For wireless network
models)
MAC Address
- - View the machine's MAC
address.
Set to
Default
- - Restore the wireless network
settings to the factory settings.
WLAN Enable
- - Turns the wireless interface on
or off.
Wi-Fi Direct
(For wireless network
models)
Push Button
- - Configure your Wi-Fi Direct
network settings using the one-
button push method.
PIN Code
- - Configure your Wi-Fi Direct
network settings using WPS with
a PIN code.
Manual
- - Configure your Wi-Fi Direct
network settings manually.
Group Owner
- - Set your machine as the Group
Owner.
Device
Information
Device Name
- View your machine's device
name.
SSID
- View the Group Owner's SSID.
When the machine is not
connected, the LCD displays
Not Connected.
IP Address
- View your machine's current IP
Address.
Status
Information
Status
- View the current Wi-Fi Direct
network status.
Signal
- View the current Wi-Fi Direct
network signal strength.
When your machine acts as
Group Owner, the LCD always
indicates a strong signal.
I/F Enable
- - Turn the Wi-Fi Direct connection
on or off.
NFC
(available only for certain
models)
- - - Turn the NFC function on or off.
E-mail
(DCP-L5500DN/
DCP-L5600DN/
DCP-L5650DN : Available
after Scan to Email Server
is downloaded)
Mail Address
- - Enter the email address.
Setup Server SMTP Server
Enter the SMTP server name
and address.
Port
Enter the port number.
Auth. for
SMTP
Select the Security method for
email notification.
SSL/TLS
Send or receive an email via an
email server that requires
secure SSL/TLS
communication.
Verify
Cert.
Verify the SMTP Server
Certificate automatically.
Setup Mail TX Sender Subject
- View the subject.
Size Limit Size Limit
Limit the size of email
documents.
645
To Next Page
Loading...
Need help?
General
Weight and Dimensions
