Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Change
How Long the LCD Backlight Stays On
Change How Long the LCD Backlight Stays On
Related Models: MFC-T910DW
Set how long the LCD backlight stays on.
1. Press Settings.
2. Press a or b to select the following:
a. Select [General Setup]. Press OK.
b. Select [LCD Settings]. Press OK.
c. Select [Dim Timer]. Press OK.
d. Select [10Secs], [30Secs], [1Min], [2Mins], [3Mins], or [5Mins]. Press OK.
3. Press Stop/Exit.
Related Information
• General Settings
486
To Next Page
Loading...
