Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Adjust
the LCD Backlight Brightness
Adjust the LCD Backlight Brightness
If you are having difficulty reading the LCD, changing the brightness setting may help.
>> DCP-T310/DCP-T510W/DCP-T710W
>> MFC-T910DW
DCP-T310/DCP-T510W/DCP-T710W
1. Press Menu.
2. Press a or b to select the following:
a. Select [General Setup]. Press OK.
b. Select [LCD Contrast]. Press OK.
c. Select [Light] or [Dark]. Press OK.
3. Press Stop/Exit.
MFC-T910DW
1. Press Settings.
2. Press a or b to select the following:
a. Select [General Setup]. Press OK.
b. Select [LCD Settings]. Press OK.
c. Select [Backlight]. Press OK.
d. Select [Light], [Med], or [Dark]. Press OK.
3. Press Stop/Exit.
Related Information
• General Settings
485
To Next Page
Loading...
