!
!
CLEAN
21
3
10
TO BE DONE EVERY WEEK
Nozzle Guards Cleaning
Both white plastic wipers [White & CMYK] should be cleaned
on both sides and the top with the Cleaning Stick T dipped
in Cleaning Solution.
Use the tip of the Cleaning Stick T
to clean under the teeth of the wiper
holder and remove the dried ink.
Important: Use seperate cleaning
sticks for each colour.
Use a mirror for a better view
Wiper Cleaning
Discard any remaining Cleaning Solution
from the Cleaning Cup in the Waste Tank
Only located below the printer.
DO NOT POUR INTO THE PRINTER MECHANISM
Wipe clean the two nozzle guards & with the Clean Stick R dipped in Cleaning
Solution.
Be sure not to touch the nozzle surface at all.
Manually move the carriage to such a position
that you can perform the cleaning with ease.
TO BE DONE EVERY WEEK
1 2
3
To Next Page
Loading...
