Brother GTX - GTX Maintenance Overview; Daily Maintenance: Nozzle Test

!
OKOK
MENUMENU
OKOK
MENUMENU
There are several maintenance procedures that must be performed daily, weekly,
or prompted basis in order to keep your printer performing properly.
This short guide describes the maintenance procedures that must be performed.
Please see the Instruction Manual for each specic maintenance procedure for step by step instructions.
GTX MAINTENANCE OVERVIEW
Please also check useful videos at
https://www.youtube.com/user/BrotherGTSeries/videos
HOW TO DO A NOZZLE TEST ?
You have to print a nozzle test for White & CMYK every morning before using the printer.
It is the only way to know the status of the nozzles in the machine.
NOZZLE TEST
If you have nozzles missing or nozzle deections, then refer to the Head Cleaning
Instructions on the next page
Always place the Platen at level A
Menu > Test Print > Nozzle Check CMYK > to check colors on a white paper sheet
Repeat the same procedure to perform a nozzle test of the White printhead
Menu > Test Print > Nozzle Check White > to check White on a black paper sheet or inkjet plastic sheet
DAILY MAINTENANCE
TO BE DONE EVERY WORKING DAY
Link to the Document: Printing Nozzle Checks
7