Brother HL-1112 - Setting with the PJL Command

CHAPTER 10 CARBON COPY FUNCTION - 8
2.2.4. Setting with the PJL command
This function supports each of the SET, DEFAULT, INQUIRE and DINQUIRE commands in the
PJL commands.
(HL-L5000D/L5580D/L5100DN/L5200DW/L6200DW/L6300DW/L6400DW)
PJL command Setting value Default value Descriptions
CARBONMODE =OFF
ON
OFF OFF: Turns off the function.
ON:
Turns on the function.
CARBONCOPIES 1 - 8 1 Sets the number of copies.
CARBON1TRAY =MPTRAY
TRAY1
TRAY2
TRAY3
TRAY4
TRAY5
TRAY1 Selects the paper tray.
CARBON1MACRO =OFF
ON
OFF Sets the additional macro.
OFF: The macro is not added.
ON: The macro is added.
CARBON1MACROID =(ID) 0 Specifies the macro.
When the macro is not set, NULL is
returned even if sending the INQUIRE or
DINQUIRE command.
CARBON2TRAY
 
(Same with CARBON1TRAY)
CARBON2MACRO
 
(Same with CARBON1MACRO)
CARBON2MACROID
 
(Same with CARBON1MACROID)
CARBON3TRAY
 
(Same with CARBON1TRAY)
CARBON3MACRO
 
(Same with CARBON1MACRO)
CARBON3MACROID
 
(Same with CARBON1MACROID)
CARBON4TRAY
 
(Same with CARBON1TRAY)
CARBON4MACRO
 
(Same with CARBON1MACRO)
CARBON4MACROID
 
(Same with CARBON1MACROID)
CARBON5TRAY
 
(Same with CARBON1TRAY)
CARBON5MACRO
 
(Same with CARBON1MACRO)
CARBON5MACROID
 
(Same with CARBON1MACROID)
CARBON6TRAY
 
(Same with CARBON1TRAY)
CARBON6MACRO
 
(Same with CARBON1MACRO)
CARBON6MACROID
 
(Same with CARBON1MACROID)
CARBON7TRAY
 
(Same with CARBON1TRAY)
CARBON7MACRO
 
(Same with CARBON1MACRO)
CARBON7MACROID
 
(Same with CARBON1MACROID)
CARBON8TRAY
 
(Same with CARBON1TRAY)
CARBON8MACRO
 
(Same with CARBON1MACRO)
CARBON8MACROID
 
(Same with CARBON1MACROID)