Brother HL-1202 - Auto Power off

General Information
46
3
Auto Power Off 3
If the machine is in Deep Sleep mode for 1 hour, it enters Power Off mode automatically. Power Off mode is
the lowest power consumption mode, which achieves a power consumption of less than 0.28 W. To start
printing, hold key on the control panel until all the LEDs light up. Then send the print data.
NOTE
• (HL-1200(E) and HL-1202(E))
You can change the Auto Power Off setting through the Remote Printer Console. For more information on
the Remote Printer Console, see Remote Printer Console (Windows
®
HL-1200(E) and HL-1202(E) only)
on page 36.
• (HL-1210W(E) and HL-1212W)
You can change the Auto Power Off setting through Web Based Management. For more information,
see the Network User’s Guide.
The machine does not go into Power Off mode when the machine is connected to a wireless network.