Brother HL-1210W - Auto Power off

General Information
47
3
Auto Power Off 3
If the machine is in Deep Sleep mode for 1 hour, it enters Power Off mode automatically. Power Off mode is
the lowest power consumption mode, which achieves a power consumption of less than 0.28 W. To start
printing, hold key on the control panel until all the LEDs light up. Then send the print data.
NOTE
• (HL-1200 and HL-1201)
You can change the Power Off mode setting through the Remote Printer Console. For more information
on the Remote Printer Console, see Remote Printer Console (Windows
®
HL-1200 and HL-1201 only)
on page 37.
• (HL-1210W and HL-1211W)
You can change the Power Off mode setting through the Web Based Management. For more information,
see the Network User’s Guide.
The machine does not go into Power Off mode when the machine is connected to a wireless network.