Brother HL-1670N - Page 239

8/2/2010
CHAPTER 5 PJL- 36
Variables Description Sample Value Range
DN/4140CN/4150CDN/4570CD
W)
BUTTONREPEAT Sets key repeating speed in Panel mode. BUTTON100MSEC,
BUTTON200MSEC,
BUTTON300MSEC,
BUTTON400MSEC,
BUTTON500MSEC,
BUTTON1000MSEC,
BUTTON1500MSEC,
BUTTON2000MSEC (HL-7050/
6050/6050D/6050DN/5270DN/52
80DW/5380DN)
BUTTON100MSEC,BUTTON20
0MSEC,BUTTON300MSEC,BU
TTON400MSEC,BUTTON500M
SEC,BUTTON600MSEC,BUTT
ON800MSEC,BUTTON1000MS
EC,BUTTON1400MSEC,BUTTO
N1500MSEC,BUTTON1800MSE
C,BUTTON2000MSEC (HL-
4140CN/4150CDN/4570CDW)
MESSAGESCROLL Sets scrolling time at Scroll message. 1-10 (HL-7050/6050/6050D/
6050DN/5270DN/5280DW/5380
DN/4140CN/4150CDN/4570CD
W)
ERRORBUZZER Sets Buzzer mode at Error condition. OFF, ON (HL-7050/6050/6050D/
6050DN)
PANELBUZZER Sets Buzzer mode for Panel Operation. OFF, ON (HL-7050/6050/6050D/
6050DN)
BUZZERVOLUME Sets Buzzer volume. LOW, HIGH (HL-7050/6050/
6050D/6050DN)
CARBONMODE Sets Carbon mode OFF, ON, AUTO, PARALLEL
(HL-
6050/6050D/6050DN/5270DN/52
80DW/5380DN)
CARBONCOPIES Set the number of Carbon copies. 1-8 (HL-
6050/6050D/6050DN/5270DN/52
80DW/5380DN)
CARBON1TRAY Select input tray for the first page. REMAINING, MP, TRAY1,
TRAY2 (If available) (HL-6050/
6050D/6050DN/5270DN/5280D
W/5380DN)
CARBON2TRAY Select input tray for the second page. REMAINING, MP, TRAY1,
TRAY2 (If available) (HL-6050/
6050D/6050DN/5270DN/5280D
W/5380DN)
CARBON3TRAY Select input tray for the third page. REMAINING, MP, TRAY1,
TRAY2 (If available) (HL-6050/
6050D/6050DN/5270DN/5280D
W/5380DN)
CARBON4TRAY Select input tray for the fourth page. REMAINING, MP, TRAY1,
TRAY2 (If available) (HL-6050/
6050D/6050DN/5270DN/5280D
W/5380DN)
CARBON5TRAY Select input tray for the fifth page. REMAINING, MP, TRAY1,
TRAY2 (If available) (HL-6050/
6050D/6050DN/5270DN/5280D
W/5380DN)
CARBON6TRAY Select input tray for the sixth page. REMAINING, MP, TRAY1,
TRAY2 (If available) (HL-6050/