Brother HL-1670N - Page 250

2010/08/02
CHAPTER 5 PJL - 47
5. PostScript-Specific Variables
The following values are PostScript ( BR-Script ) specific and can be set and requested using PJL. The BR-
Script mode is standard in some models but may be available only when the optional BR-Script 2 ROM
board is installed into the printer. These variables must be set using the LPARM : IBM option.
Variables Description Sample Value Range
PAPER Sets the paper size. LETTER, A4, LEGAL, A5, A6, B5,
EXECUTIVE, COM10,
MONARCH, C5, DL, JISB5
(All models)
B6 (HL-8050N)
B6, A4LONG (HL-
1650/1670N/2460/7050)
A3, LEDGER, JISB4, LTRS,
EXECUTIVES, B5S,
A4LONG(HL-3260N)
B6, DLL, POSTCARD,
ORGANIZERJ, ORGANIZERK,
ORGANIZERL, ORGANIZERM,
FOLIO, USERDEF, A4LONG(HL-
1850/1870N/5050/5070N/5150D/51
70DN/6050/6050D/
6050DN/5240/5250DN/5270DN/52
80DW)
B6, DLL, POSTCARD, FOLIO,
A4LONG, A5L, P3X5, ENVYOU4,
ENVCHOU3(HL-
5340D/5350DN/5370DW/5380DN)
FOLIO,DLL,POSTCARD,A5L,JIS
B6,ORGANIZERJ,P3X5,ENVYOU
4,ENVCHOU3,ROC16K,SIXTEEN
K195X270,SIXTEENK184X260
(HL-
4140CN/4150CDN/4570CDW)
ORIENTATION Sets the orientation. PORTRAIT, LANDSCAPE
PRTPSERRS The printing of a PostScript error
page is enabled or disabled by this
variable
ON or OFF
CRLFCONV
(HL-1050/1070/
1250/1270N/1450/
1470N/
P2500)
When set to ON, CR codes in the
PostScript data are converted to
LF codes.
ON or OFF
APPLETALKPS When set to ON, the printer fixes
the emulation to BR-Script 2 mode
for accepting data from
AppleTalk. When set to OFF, the
printer's auto emulation switching
function judges the emulation.
ON or OFF