What to do if my Brother Laser printer is not printing?
If your Brother Laser printer is not printing, ensure the cable is securely connected to the machine. Verify that the machine is powered on and that no error LEDs are lit on the control panel. Also, confirm that you have selected the correct printer driver.
Why is my Brother Laser printer not printing?
If your Brother Laser printer is not printing, ensure the cable is securely connected to the machine. Also, verify that the machine is powered on and that no error LEDs are lit on the control panel. Finally, confirm that you have selected the correct printer driver.
What to do if a paper jam has occurred in my Brother Laser printer?
If a paper jam has occurred in your Brother Laser printer, clear the jammed paper.
What to do if my Brother HL-2130 Printer says 'Toner Ended'?
If your Brother printer displays 'TONER ENDED', replace the toner cartridge with a new one.
How do I fix the 'Replace Drum' message on my Brother Printer?
If your Brother printer indicates 'REPLACE DRUM', replace the drum unit with a new one.
What to do if my Brother HL-2130 says 'No Toner'?
If your Brother printer is displaying a 'NO TONER' message, open the front cover and install the toner cartridge.
How to fix 'Memory Full' error on Brother HL-2130?
If your Brother printer displays a 'MEMORY FULL' error, you can press the Go button to print the data remaining in the printer's memory. Alternatively, cancel the print job to delete the remaining data. Another approach is to reduce the complexity of your document or lower the print resolution.
Why won't my Brother Laser printer feed paper?
If your Brother Laser printer is not feeding paper, ensure the paper in the tray is straight and not curled. If curled, straighten it before printing. Try removing the paper, turning the stack over, and placing it back in the tray. If the issue persists, replace the paper, reduce the amount of paper in the tray, ensure that manual feed mode is not selected in the printer driver, and clean the paper pick-up roller.
How to fix cover is open error on Brother All in One Printer?
If your Brother All in One Printer displays 'Cover is Open', the front cover is not completely closed. Close the front cover of the machine.
What to do if Brother All in One Printer says no paper?
If your Brother All in One Printer displays a 'No Paper' error, it means the printer is out of paper or the paper isn't correctly loaded. Refill the paper in the paper tray and press Start, or remove the paper and load it again, then press Start. If the issue continues, the paper pick-up roller may need cleaning.
General| Network ready | No |
|---|---|
| N-up printing | 2, 4, 16, 25 |
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Time to first page (black, normal) | 10 s |
| Print speed (black, normal quality, A4/US Letter) | 20 ppm |
| Maximum duty cycle | - pages per month |
| Number of print cartridges | 1 |
| Maximum internal memory | - MB |
| Sound power level (standby) | 31 dB |
| Sound pressure level (printing) | 53 dB |
| Display | LED |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Custom media width | 69.9 - 215.9 mm |
| Maximum print size | 216 x 406 mm |
| Custom media length | 116 - 406.4 mm |
| Paper tray media types | Bond paper, Plain paper, Recycled paper |
| Paper tray media weight | 60 - 105 g/m² |
| Non-ISO print media sizes | Letter |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Multi-purpose tray media types | Bond paper, Envelopes, Heavyweight paper, Labels, Plain paper, Recycled paper, Transparencies |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 62 W |
| Power consumption (printing) | 421 W |
| Power consumption (PowerSave) | 0.8 W |
| Package weight | 8000 g |
| Power LED | Yes |
| Sustainability certificates | ENERGY STAR |
| Mac operating systems supported | Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion |
| Windows operating systems supported | Windows 2000, Windows 2000 Professional, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64 |
Weight and Dimensions| Dimensions (WxDxH) | 368 x 360 x 183 mm |
|---|
To Next Page
