Brother HL-2130 - Error Messages in the Status Monitor

2-17
Confidential
3.3 Error messages in the Status Monitor
The Status Monitor will report problems with the printer. Take the proper action by seeing to
the reference page.
* This message is for HL-2240D/2250DN/2270DW/2275DW only.
Error message Refer to:
CANNOT DETECT TONER 4.5.2
DRUM END SOON 4.5.7
DRUM ERROR 4.5.8
DRUM STOP 4.5.9
DUPLEX DISABLED* 4.1.11
FRONT COVER OPEN 4.9.4
FUSER COVER OPEN 4.9.5
FUSER ERROR 4.6.1
JAM TRAY1
JAM INSIDE
JAM REAR
JAM DUPLEX*
4.1.5
MANUAL FEED 4.1.3
MEMORY FULL 4.8.2
NO PAPER T1 4.1.2
NO TONER 4.5.6
PRINT OVERRUN 4.8.3
REPLACE DRUM 4.5.9
REPLACE TONER 4.5.4
Service call error
-
SIZE ERROR DX* 4.1.13
TONER ENDED 4.5.5
TONER LOW 4.5.3