EasyManua.ls Logo

Brother HL-2270DW - Service Manual

Brother HL-2270DW
181 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Confidential
Brother Laser Printer
SERVICE MANUAL
MODEL:
HL- 2130/2135W/2220/2230/2240/
2240D/2250DN/2270DW/2275DW
Read this manual thoroughly before maintenance work.
Keep this manual in a convenient place for quick and easy reference at all times.
September 2010
SM-PRN079
84UC0*
(8)

Table of Contents

Other manuals for Brother HL-2270DW

Questions and Answers

  • S
    Sherri JonesAug 29, 2025
    What to do if my Brother Laser printer says NO TONER?
    • B
      Brittany JacksonAug 29, 2025
      If your Brother Laser printer displays 'NO TONER', open the front cover, then install the toner cartridge.
  • E
    Ethan BrownAug 25, 2025
    How to resolve 'Cartridge Error' on Brother Printer?
    • D
      David RichardAug 25, 2025
      If you are getting a 'CARTRIDGE ERROR' on your Brother printer, make sure that the drum unit and toner cartridge assembly is installed properly.
  • D
    Dawn HartSep 23, 2025
    What does 'Not Available' mean on my Brother All in One Printer and how to fix it?
    • I
      Ian GarciaSep 23, 2025
      If your Brother All in One Printer displays 'Not Available', it means this function is not permitted to all IDs by Secure Function Lock 2.0. Contact your administrator to check your Secure Function Lock Settings.
  • B
    Benjamin RobinsonSep 1, 2025
    How to fix cartridge error on Brother All in One Printer?
    • N
      Norma HerreraSep 1, 2025
      A cartridge error on your Brother All in One Printer often means the toner cartridge isn't correctly installed. To fix this, pull out the drum unit, remove the toner cartridge, and then reinstall it into the drum unit.
  • J
    jacquelinebatesSep 4, 2025
    Why won't my Brother HL-2270DW feed paper?
    • B
      Brenda WardSep 4, 2025
      If your Brother machine is not feeding paper, ensure the paper in the tray is straight and not curled. Straighten the paper if necessary, or try removing the paper, turning the stack over, and putting it back in the tray. If curling persists, replace the paper. Reduce the amount of paper in the tray and ensure manual feed mode is not selected in the printer driver. Clean the paper pick-up roller.
  • C
    Christopher WattsAug 30, 2025
    Why is my Brother HL-2270DW Printer showing a paper size error?
    • R
      Richard PerezAug 30, 2025
      If your Brother printer is displaying a paper size error, it could be due to: * The registration front actuator catching. Correct its position. * The main PCB might be faulty and need replacement.
  • D
    Daniel MorrisonAug 27, 2025
    How to delete the "Replace Toner" message on a Brother HL-2270DW Printer after replacing the toner?
    • M
      melissa06Aug 27, 2025
      If you're still seeing the "Replace Toner" message on your Brother printer after replacing the toner, consider the following: * The new toner actuator might be catching; correct its position. * Check and reconnect the harness of the Panel PCB if there's a connection failure. * The Panel PCB assembly or Main PCB assembly might need replacement.
  • K
    Kathy DavisSep 6, 2025
    What does 'Drum Stop' mean on my Brother Printer?
    • M
      Marissa PerrySep 6, 2025
      If your Brother printer displays 'DRUM STOP', replace the drum unit with a new one.
  • A
    Adam WashingtonSep 2, 2025
    How to fix 'Drum Error' on Brother All in One Printer?
    • J
      Jeremy BryantSep 3, 2025
      If your Brother All in One Printer displays 'Drum Error', it indicates that the corona wire on the drum unit needs to be cleaned. Clean the corona wire on the drum unit to resolve this issue.
  • A
    Aaron PettyAug 26, 2025
    What to do if my Brother HL-2270DW Printer has paper jam at paper tray and front cover section?
    • J
      James RojasAug 26, 2025
      If you're experiencing paper jams in your Brother printer's paper tray and front cover area, it could be due to several reasons. The paper edge actuator or registration front actuator might be catching. Try correcting the position of the paper edge actuator or registration front actuator. Another cause might be worn out paper feeding kit, which requires replacement. Also, check the harness connection of the registration front/rear sensor PCB ASSY and reconnect it if necessary. In some cases, the low voltage power supply PCB ASSY or the main PCB might be faulty and require replacement. Finally, the registration front/rear sensor PCB ASSY may be failing, requiring a check of the registration front and rear sensor performance. If a problem is detected, replace the regist frame ASSY.

Brother HL-2270DW Specifications

General IconGeneral
ColorNo
N-up printing2, 4, 9, 16, 25
Print technologyLaser
Maximum resolution2400 x 600 DPI
Economical printingYes
Time to first page (black, normal)8.5 s
Print speed (black, normal quality, A4/US Letter)27 ppm
Maximum internal memory- MB
Sound power level (standby)31 dB
Sound pressure level (printing)53 dB
Total input capacity250 sheets
Total output capacity100 sheets
Total number of input trays1
Maximum duty cycle- pages per month
Custom media width76.2 - 216 mm
Maximum print size216 x 406 mm
Custom media length116 - 406.4 mm
Paper tray media typesBond paper, Plain paper, Recycled paper
Paper tray media weight60 - 105 g/m²
Non-ISO print media sizesLetter
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Multi-purpose tray media typesBond paper, Envelopes, Heavyweight paper, Labels, Plain paper, Recycled paper, Transparencies
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 163 g/m²
Wi-Fi standards802.11b, 802.11g
Security algorithms128-bit WEP, 64-bit WEP, WPA-PSK, WPA-TKIP, WPA2-PSK
Sustainability certificatesENERGY STAR
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)65 W
Power consumption (printing)495 W
Power consumption (PowerSave)0.9 W
Operating temperature (T-T)10 - 32.5 °C
Operating relative humidity (H-H)20 - 80 %
Package weight8300 g
Standard interfacesEthernet, USB 2.0, Wireless LAN
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Mac operating systems supportedMac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion
Server operating systems supportedWindows 2000 Advanced Server, Windows 2000 Server, Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64
Windows operating systems supportedWindows 2000, Windows 2000 Professional, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)368 x 360 x 183 mm

Related product manuals