App. 2-1
Confidential
APPENDIX 2 DELETION OF USER SETTING INFORMATION
The user setting information of the printer is recorded in the main PCB. Reset the printer
back to its default printer settings in the following procedures.
(1) Close the front cover, and turn the power supply of the printer on while pressing down
the [Go] button. Make sure that all LEDs light up.
(2) Release the [Go] button, and then make sure that all LEDs light off.
(3) Press the [Go] button ten times.
(4) When this operation is completed, the printer automatically return to the ready state.
To Next Page
Loading...
