Brother HL-2270DW - Develop Drive Sub ASSY, Develop Gear Joint;52

3-55
Confidential
9.23 Develop Drive Sub ASSY, Develop Gear Joint/52
(1) Remove the Taptite cup S M3X6 SR screw and three Taptite bind B M4x12 screws to
remove the Develop drive sub ASSY.
Fig. 3-54
Assembling Note:
• When assembling the Develop drive sub ASSY, tighten the three Taptite bind B M4x12
screws in numerical order written in the plate.
• Be careful not to bent the FG plate laser L.
Develop drive sub ASSY
FG plate laser L
Taptite bind B M4x12
1
3
2
Taptite cup S M3X6 SR