EasyManua.ls Logo

Brother HL-2250DN - User Manual

Brother HL-2250DN
150 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
USER’S GUIDE
Brother Laser Printer
HL-2130
HL-2132
HL-2220
HL-2230
HL-2240
HL-2240D
HL-2242D
HL-2250DN
HL-2270DW
For visually-impaired users
You can read this manual with Screen
Reader ‘text-to-speech’ software.
You must set up the hardware and install the driver before you can use the machine.
Please use the Quick Setup Guide to set up the machine. You can find a printed copy in the box.
Please read this User’s Guide thoroughly before you use the machine.
Please visit us at http://solutions.brother.com/
where you can get product support, the latest driver updates and
utilities, and answers to frequently asked questions (FAQs) and technical questions.
Note: Not all models are available in all countries.
Version B
UK/IRE

Table of Contents

Other manuals for Brother HL-2250DN

Questions and Answers

  • T
    Todd HowardAug 30, 2025
    What to do if my Brother Laser printer says NO TONER?
    • C
      Christopher BennettAug 31, 2025
      If your Brother Laser printer displays 'NO TONER', open the front cover, then install the toner cartridge.
  • C
    Christopher LeeAug 25, 2025
    How to resolve 'Cartridge Error' on Brother HL-2250DN?
    • J
      Jessica MullinsAug 25, 2025
      If you are getting a 'CARTRIDGE ERROR' on your Brother printer, make sure that the drum unit and toner cartridge assembly is installed properly.
  • K
    Kathryn HawkinsSep 23, 2025
    What does 'Size Error DX' mean on my Brother All in One Printer and how to resolve it?
    • N
      Nathan AustinSep 23, 2025
      If your Brother All in One Printer displays 'Size Error DX', it means the paper in the tray is not a suitable size for automatic duplex printing. Load A4 paper for automatic duplex printing, and then press Start.
  • M
    Maurice PittsSep 4, 2025
    Why does my Brother HL-2250DN Printer say 'No Paper T1'?
    • K
      Kayla MackSep 4, 2025
      If your Brother printer displays a 'No Paper T1' error, it could be due to several reasons. The paper tray might be empty or not correctly installed; if it’s empty, add a new stack of paper and press Go. Even if there is paper, ensure it is straight and not curled—straighten if necessary. Try removing the paper, turning the stack over, and placing it back in the tray. Reduce the amount of paper in the tray. Also, verify that the paper meets Brother’s recommended specifications and that you've loaded the same size paper selected in the driver settings. If the problem persists, the paper pick-up roller may be dirty and needs cleaning.
  • H
    Hailey LongSep 8, 2025
    What should I do if my Brother Laser printer says 'Toner Low'?
    • K
      Kenneth MedinaSep 8, 2025
      If your Brother Laser printer indicates 'TONER LOW', it's time to buy a new toner cartridge and have it ready for when the 'REPLACE TONER' status is indicated.
  • D
    Dennis CareySep 2, 2025
    Why is my Brother HL-2250DN Printer showing a paper size error?
    • O
      Omar PhillipsSep 2, 2025
      If your Brother printer is displaying a paper size error, it could be due to: * The registration front actuator catching. Correct its position. * The main PCB might be faulty and need replacement.
  • S
    Samuel MoonAug 28, 2025
    How to delete the "Replace Toner" message on a Brother HL-2250DN Printer after replacing the toner?
    • J
      Joy MerrittAug 28, 2025
      If you're still seeing the "Replace Toner" message on your Brother printer after replacing the toner, consider the following: * The new toner actuator might be catching; correct its position. * Check and reconnect the harness of the Panel PCB if there's a connection failure. * The Panel PCB assembly or Main PCB assembly might need replacement.
  • D
    Danny GarnerSep 10, 2025
    Why does the paper slide off the output tray of my Brother Laser printer?
    • C
      Cynthia AdamsSep 12, 2025
      If the paper slides off the top output tray of your Brother Laser printer, lift up the output tray support flap 1. If the paper curls and slides off, lift up the output tray support flap 2.
  • A
    Amber MoonSep 6, 2025
    What does 'Toner Low' mean on my Brother HL-2250DN Printer?
    • P
      Patricia RaySep 6, 2025
      If your Brother printer is indicating 'TONER LOW', buy a new toner cartridge and have it ready for when the 'REPLACE TONER' status is indicated.
  • M
    michaelbishopAug 27, 2025
    What to do if my Brother HL-2250DN has paper jam at paper tray and front cover section?
    • K
      Kimberly JohnsonAug 27, 2025
      If you're experiencing paper jams in your Brother printer's paper tray and front cover area, it could be due to several reasons. The paper edge actuator or registration front actuator might be catching. Try correcting the position of the paper edge actuator or registration front actuator. Another cause might be worn out paper feeding kit, which requires replacement. Also, check the harness connection of the registration front/rear sensor PCB ASSY and reconnect it if necessary. In some cases, the low voltage power supply PCB ASSY or the main PCB might be faulty and require replacement. Finally, the registration front/rear sensor PCB ASSY may be failing, requiring a check of the registration front and rear sensor performance. If a problem is detected, replace the regist frame ASSY.

Brother HL-2250DN Specifications

General IconGeneral
ColorNo
N-up printing2, 4, 6, 25
Print technologyLaser
Maximum resolution2400 x 600 DPI
Economical printingYes
Time to first page (black, normal)8.5 s
Print speed (black, normal quality, A4/US Letter)26 ppm
Duplex print speed (black, normal quality, A4/US Letter)5 ppm
Maximum internal memory- MB
Sound power level (standby)31 dB
Sound pressure level (printing)53 dB
Total input capacity250 sheets
Total output capacity100 sheets
Total number of input trays1
Maximum duty cycle- pages per month
Page description languagesPCL 6
Custom media width76.2 - 216 mm
Maximum print size216 x 406 mm
Custom media length116 - 406.4 mm
Paper tray media typesBond paper, Plain paper, Recycled paper
Paper tray media weight60 - 105 g/m²
Non-ISO print media sizesLetter
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Multi-purpose tray media typesBond paper, Envelopes, Heavyweight paper, Labels, Plain paper, Transparencies
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 163 g/m²
Sustainability certificatesENERGY STAR
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)65 W
Power consumption (printing)495 W
Power consumption (PowerSave)0.9 W
Package weight8300 g
Operating temperature (T-T)10 - 32.5 °C
Operating relative humidity (H-H)20 - 80 %
Standard interfacesEthernet, USB 2.0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Mac operating systems supportedMac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard
Server operating systems supportedWindows 2000 Advanced Server, Windows 2000 Server, Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64
Windows operating systems supportedWindows 2000 Professional, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)368 x 360 x 183 mm

Related product manuals