Brother HL-2250DN - Status Monitor

Driver and Software
38
2
 Serial No. (2)
By clicking Auto Detect, the printer driver will query the machine and display its serial number. If it fails to
receive the information, the screen will display "---------------".
Note
The Auto Detect function is not available under the following machine conditions:
• The machine's power switch is off.
• The machine is in an error mode.
• The machine is in a network shared environment.
• The cable is not connected to the machine correctly.
Status Monitor 2
This reports the machine status (any errors that may happen with the machine) when printing. If you would
like to turn the status monitor on, follow these steps:
Click the Start button, All Programs
1
, Brother, your machine (e.g. Brother HL-2270DW), and then Status
Monitor.
1
Programs for Windows
®
2000 users