23
Connecting the printer to your Macintosh & installing the BR-Script PPD file
1 Click Connect the interface cable &
Install the driver/utility from the Initial
Setup menu.
2 Make sure the printer power switch is on.
3 Click the Install button, and follow the on-
screen instructions.
4 Connect the USB interface cable to your
Macintosh, and then connect it to the
printer.
5 From the Go menu, select Applications.
For USB Interface Cable Users
For Mac OS
®
X 10.1 / 10.2 Users
If this screen appears, select the USB
interface.
Do not connect the USB cable to the
keyboard USB Port or a non-powered
USB Hub.
Continue to
the next page
Setting Up
Your Printer
For
Administrators
Installing the Driver
Macintosh
®
USB
To Next Page
Loading...
