Brother HL-5170DN - For Mac os X 10.1; 10.2 Users; Mac os X 10.1; 10.2 Users

27
Connecting the printer to your Macintosh & installing the BR-Script PPD file
1 Click Connect the interface cable &
Install the driver/utility from the Initial
Setup menu.
2 Turn off the printer power switch.
3 Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
4 Turn on the printer power switch.
5 Click the Install button and follow the on
screen instructions.
6 From the Go menu, select Applications.
7 Open the Utilities folder.
For Network Interface Cable Users
For Mac OS
®
X 10.1 / 10.2 Users
If this screen appears, select the Network
interface
.
Macintosh
®
Network
For
Administrators
Installing the Driver
Setting Up
Your Printer