Why Brother Printer says memory full?
If your Brother printer displays a 'Memory Full' error, you can try the following: First, press Go to print the remaining data in the printer memory. Alternatively, cancel the print job to delete the remaining data. If the issue persists, reduce the complexity of your document or decrease the print resolution. As a last resort, consider adding more memory to the printer.
What to do if my Brother HL-5240 says print overrun?
If your Brother printer displays a 'Print Overrun' error, try these steps: First, press the Go button to print the remaining data in the printer memory. If that doesn't work, cancel the print job to delete the remaining data. Should the error persist, reduce the complexity of your document or lower the print resolution. You might also consider adding more memory. As another option, set page protection to AUTO using the supplied Windows driver or Remote Printer Console program.
Why Brother Printer cannot print full pages and shows MEMORY FULL error?
If your Brother printer cannot print full pages and displays a 'MEMORY FULL' error, you can try the following: Press 'Go' to print the remaining data in the printer memory. Alternatively, cancel the print job to delete the remaining data. Reduce the complexity of your document or lower the print resolution. If the problem continues, add more memory.
How to fix Brother HL-5240 when it does not feed paper from the MP tray?
If your Brother printer is not feeding paper from the MP tray, fan the paper well and firmly place it back in the tray. Also, ensure that you have selected the MP Tray as the Paper Source in the printer driver.
What to do if Brother HL-5240 displays 'Jam MP Tray'?
If your Brother printer displays 'Jam MP Tray', clear the jammed paper from the indicated area.
Why Brother HL-5240 Printer cannot print full pages and shows PRINT OVERRUN error?
If your Brother printer cannot print full pages and shows a 'PRINT OVERRUN' error, try these solutions: Press 'Go' to print the remaining data in the printer memory. If that doesn't work, cancel the print job to delete the remaining data in the printer memory. Reduce the complexity of your document or lower the print resolution. You can also add more memory. Alternatively, set page protection to AUTO using the supplied Windows® driver or Remote Printer Console program.
What to do if Brother Printer does not feed paper?
If your Brother printer isn't feeding paper, ensure the paper in the tray is straight. You can also try removing the paper, turning the stack over, and placing it back in the tray. Reduce the amount of paper in the tray. Also, verify that manual feed mode is not selected in the printer driver.
What to do if Brother HL-5240 has no paper?
If your Brother printer indicates 'No Paper', the paper tray may be empty or not correctly installed. If empty, add a new stack of paper and press Go. If paper is present, ensure it is straight. Try reducing the amount of paper in the tray. Also, make sure you are using paper that meets Brother's recommended specifications and that the paper size matches the current driver setting.
How to fix Brother Printer when printing on normal paper, it creases?
To resolve creasing when printing on normal paper with your Brother printer, change the Media Type setting in the printer driver to a thin setting.
How to fix Brother Printer when it prints 'Incorrect Paper Size for Auto DX'?
If your Brother printer displays 'Incorrect Paper Size for Auto DX', press Go or Job Cancel. Then, set the correct paper size you want to use, or load the same size paper selected in the current driver setting.
General| Color | No |
|---|---|
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 8.5 s |
| Print speed (black, normal quality, A4/US Letter) | 28 ppm |
| Internal memory | 16 MB |
| Maximum internal memory | 512 MB |
| Sound power level (standby) | 30 dB |
| Sound pressure level (printing) | 50 dB |
| Mac compatibility | Yes |
| Networking features | NC-2100p |
| Compatible operating systems | Windows 95 / 98 /Me & NT4.0 / 2000 / XP Mac OS Linux DOS |
| Total input capacity | 250 sheets |
| Total output capacity | 150 sheets |
| Maximum input capacity | 500 sheets |
| Media weight (tray 1) | 60 - 105 g/m2 |
| Non-ISO print media sizes | Letter |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Supported network protocols (IPv4) | TCP/IP, ARP, RARP, BOOTP, DHCP, WINS/NetBIOS, LPR/LPD, Port9100, POP3/SMTP, SMBPrint, TELNET, SNMP, HTTP, TFTP |
| Display | - |
| Bundled software | - PCL Printer Driver & BR Script 3 (PPD file)~ Windows 95 / 98 / Me, & NT4.0 / 2000 / XP - Brother Laser Driver ~ Mac 9.1-9.2, Mac OS X 10.2.4 ~ - GDI Printer Driver - BR-Script 3 (PPD) - Interactive Help |
| Power consumption (standby) | 80 W |
| Power consumption (printing) | 610 W |
Weight and Dimensions| Dimensions (WxDxH) | 371 x 383 x 246 mm |
|---|
To Next Page
