Network printing from Macintosh using the BR-Script 3 driver
140
13
For Mac OS X 10.5.x 13
a Turn on your Macintosh.
b Choose System Preferences from the Apple menu.
c Choose Print & Fax.
d Click + which is located below the Printers section.
e Choose IP.
f Choose Line Printer Daemon - LPD from the Protocol list.
g Enter the TCP/IP address or DNS Name of the printer into the Address box.
Note
When specifying the Queue, use the PostScript
®
service "BRNxxxxxxxxxxxx_AT" for Macintosh. Where
"xxxxxxxxxxxx" is your machine's MAC Address (Ethernet Address).
To Next Page
Loading...
