Wireless Configuration for Macintosh using the Brother installer application (For HL-5370DW)
87
5
t To communicate with the configured wireless device, you must configure your computer to use the same
wireless settings. Manually change the wireless settings on your computer to match the machine's
wireless settings shown on this screen. Check the box after you confirm these settings, and then click
Next or Finish.
(The settings shown on this screen are for example only. Your settings will not be the same.)
You have completed the wireless setup. If you chose to install the printer driver in step g, Go
to Installing the printer driver on page 88.
To Next Page
Loading...
