Compilation and Publication
Under the supervision of Brother industries, Ltd., this manual has been compiled and published,
covering the latest product descriptions and specifications.
The
contents of this manual and the specifications of this product are subject to change
without
notice.
Brother
reserves
the
right
to make changes
without
notice in the specifications and materials
contained herein and shall not be responsible for any damages (including consequential) caused
by reliance on the materials presented, including but not
limited
to typographical and other errors
relating to the publication.
Put
your product on aflat,
level,
stable surface that is free of vibration and
shocks,
such as a desk.
Put
the product near a telephone wail jack
(IViFC
only) and a standard grounded AC power
outlet.
Choose
a location where the temperature remains between 50°F and 90.5°F (10°C and 32.5°C)
and the
humidity
is between 20% to 80% (without condensation).
DO
NOT expose the product to direct sunlight,
excessive
heat, open flames, corrosive
gasses,
moisture or dust. Doing so may create a risk of an eiectricai shock, eiectricai short or fire, it may
also
damage the product and/or render it inoperable.
Choosing
a location
A
A
A
A
DO
NOT place the product near heaters, air conditioners, eiectricai
fans,
refrigerators, or water.
Doing so may create the risk of a short circuit or fire, as water may come
into
contact
with
the
product (including condensation caused by heating/air conditioning/ventilation equipment).