Brother HL-5445D

70
Driver and Software
2
Software 2
Software for networks 2
For the information about network utility software uu Network User's Guide: Network features
Remote Printer Console (Windows
®
only) 2
Remote Printer Console is software to change many of the printer settings independently of your application.
For example, you can change the settings for printer margin, sleep mode, character set and so on. These
settings are then remembered and used by the machine. The application and printer driver settings will take
priority over the Remote Printer Console settings.
How to use and install the Remote Printer Console software 2
To use the Remote Printer Console software, follow the steps below.
a Put the supplied installation CD-ROM into your CD-ROM drive and close the opening screen when it
appears.
b Open Windows
®
Explorer and choose the CD-ROM drive.
c Double-click the tools folder.
d Double-click the RPC folder.
e Refer to the RPC_User’s_Guide.pdf for how to install and use the Remote Printer Console.