84
General Information
Print Fonts 3
You can print a list of the internal fonts using the control panel button or printer driver.
Using the Go key 3
a Turn off the machine.
b Make sure that the front cover is closed and the power cord is plugged in.
c Hold down Go as you turn on the power switch. Keep Go pressed down until all the LEDs light up and
then the Ready LED turns off.
d Release Go. Make sure that all the LEDs turn off.
e Press Go twice. The machine will print a list of the internal fonts.
Using the printer driver 3
If you are using the Brother’s Windows
®
printer driver, you can print a list of the internal fonts by clicking the
Print Fonts button in the Support dialog.
To Next Page
Loading...
