To Next Page
W
whitney64Aug 30, 2025
What to do if my Brother HL-6050 Printer says BACK TRAY OPEN?
- FFranklin GrimesAug 30, 2025
If your Brother printer displays 'BACK TRAY OPEN', close the back output tray located at the back of the printer.
What to do if my Brother HL-6050 Printer says BACK TRAY OPEN?
If your Brother printer displays 'BACK TRAY OPEN', close the back output tray located at the back of the printer.
What to do if my Brother HL-6050 says MANUAL FEED?
If your Brother printer displays 'MANUAL FEED', put the same size of paper in the multi-purpose tray as shown on the LCD. If the printer is paused, press Go.
What to do if my Brother Printer says FRONT COVER OPEN?
If your Brother printer displays 'FRONT COVER OPEN', close the front cover of the printer.
What to do if my Brother Printer displays CHANGE DRUM SOON?
If your Brother printer displays 'CHANGE DRUM SOON', the drum unit is almost at the end of life. Prepare a new drum unit.
How to clean drum unit on Brother HL-6050?
To clean the drum unit on your Brother printer, open the front cover, take out the drum unit assembly, and gently slide the blue tab of the drum unit across several times.
Why Brother Printer does not load paper?
If your Brother Printer does not load paper, check that the paper in the tray is straight. If the paper is curled, straighten it before printing. You might also remove the paper, turn the stack over, and put it back in the tray. Try reducing the amount of paper in the tray. Also, ensure that manual feed mode is not set in the printer driver. If there is paper dust on the separation roller, wipe it off with a moistened soft cloth. Note that the pickup roller or separation pad may need to be replaced; consider contacting your dealer or Brother customer service for a replacement.
What to do if my Brother HL-6050 Printer says MEMORY FULL?
If your Brother printer displays 'MEMORY FULL', add more memory.
Why is my Brother Printer not printing?
If your Brother printer is not printing, ensure that the cable is correctly connected to the printer and that you have selected the appropriate printer driver.
What to do if my Brother HL-6050 Printer shows TONER LOW?
If your Brother Printer displays a 'TONER LOW' message, it means you should purchase a new toner cartridge. Have the new cartridge ready, so you can replace the old one when you receive a 'TONER LIFE END' message.
What to do if my Brother Printer displays TRAY 1 ERROR?
General| Color | No |
|---|---|
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 11 s |
| Print speed (black, normal quality, A4/US Letter) | 24 ppm |
| Maximum print size | 210 x 297 mm |
| Media weight (tray 1) | 60 - 105 g/m2 |
| Non-ISO print media sizes | Letter |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 161 g/m² |
| Processor model | Aurora SPARClite |
| Built-in processor | Yes |
| Maximum internal memory | 160 MB |
| Sound power level (standby) | 39 dB |
| Sound pressure level (printing) | 52 dB |
| Compatibility | PC & Mac |
| Compatible operating systems | Windows 95/98/Me/NT4.0/2000, XP, Vista Mac OS8.6-9.2, OSX 10.1-10.2 Linux |
| Maximum input capacity | 500 sheets |
| Power consumption (off) | 8 W |
| Power consumption (standby) | 110 W |
| Power consumption (printing) | 600 W |
| Number of print cartridges | 1 |
Weight and Dimensions| Dimensions (WxDxH) | 400 x 425 x 310 mm |
|---|
