Brother HL-8050N - Page 7

vi
Overview.....................................................................7-1
Macintosh
®
Configuration (Mac OS
®
8.5 to 9.2) .........7-3
How to Select the Print Server (AppleTalk/EtherTalk)7-4
How to Select the Print Server (TCP/IP) ....................7-4
Macintosh
®
Configuration (Mac OS
®
X 10/10.1/10.2).7-8
How to Select the Print Server (AppleTalk/EtherTalk)7-8
How to Select the Print Server (TCP/IP) ....................7-9
Druck über einen Macintosh
®
mittels der einfachen
Netzwerkkonfiguration unter Mac OS
®
X (Mac OS
®
X 10.2.4
- 10.3 oder neuere Versionen)........................................7-10
How to Select the Printer Driver...............................7-10
Changing the Configuration............................................7-11
Other Sources of Information..........................................7-11
8 DLC Printing..........................................................................8-1
Printing from Windows NT
®
4.0 or Windows
®
2000...........8-1
Overview.....................................................................8-1
Configuring DLC on Windows NT
®
4.0 and Windows
®
2000............................................................................8-1
Windows
®
2000 Printer Setup ....................................8-2
Windows NT
®
4.0 Printer Setup...................................8-3
Configuring DLC on Other Systems ...........................8-4
Other Sources of Information .....................................8-5
9 Web Based Management .....................................................9-1
How to use a Web Browser to Manage Your Device........9-1
Overview.....................................................................9-1
How to Connect to Your Printer Using a Browser ......9-2
Other Sources of Information .....................................9-2
10 TCP/IP Configuration..........................................................10-1
Assigning TCP/IP Information.........................................10-1
Overview...................................................................10-1
Using the Printer Control Panel to Allocate an IP Address
(Printers with LCD Panels Only)...............................10-2
Changing the IP Address Using the BRAdmin Application
10-2
Using BRAdmin and the IPX/SPX Protocol to Set the IP
Address ....................................................................10-3
Using BRAdmin and the TCP/IP Protocol to Set the IP
Address ....................................................................10-4
Using DHCP to Configure the IP Address................10-5
Using APIPA to Configure the IP Address................10-5
Using ARP to Configure the Print Server IP Address.10-