Home > Introduction to Your Brother Machine > Control Panel Overview
Control Panel Overview
The control panel will vary depending on your model.
1. LCD (Liquid Crystal Display)
Displays messages to help you set up and use your machine.
Wireless Models:
A four-level indicator shows the wireless signal strength if you are using a wireless connection.
2. Power On/Off Button
• Turn on the machine by pressing .
• Turn off the machine by pressing and holding
. The LCD displays [Shutting Down] for a few
seconds before going off.
3. Network Buttons
• Wired Models:
Network
Press Network to set up wired network settings.
• Models with Wireless Function:
WiFi
Press the WiFi button and launch the wireless installer on your computer. Follow the on-screen
instructions to set up a wireless connection between your machine and your network.
When the WiFi light is on, your Brother machine is connected to a wireless access point. When the WiFi
light blinks, the wireless connection is down, or your machine is in the process of connecting to a wireless
access point.
4. Menu Buttons
OK
Press to store your machine settings. After you change a setting, the machine returns to the previous
menu level.
7
To Next Page
Loading...
Need help?
General