Examples of poor print quality Recommendation
ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz.
ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz.
ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz.
ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz.
Poor fixing
• Make sure the two green levers inside the back cover
are in the up position. Pull up the two green levers
until they stop.
• Make sure the media type setting in the printer driver
matches the type of paper you are using.
• Choose Improve Toner Fixing mode in the printer
driver.
If this selection does not provide enough
improvement, change the printer driver setting in
Media Type to a thick setting. If you are printing an
envelope, choose Env. Thick in the media type
setting.
Envelope creases
• Make sure the two green levers inside the back cover
are pulled down to the envelope position when you
print envelopes. After you have finished printing, reset
the levers back to their original position. Pull up the
levers until they stop.
• Make sure envelopes are printed with the back cover
(face up output tray) opened.
• (For models with Manual Feed Slot)
Make sure envelopes are fed only from the manual
feed slot.
Related Information
• Troubleshooting
Related Topics:
• Test Print
• Clean the Drum Unit Using Drum Dot Print
• Recommended Print Media
• Reduce Toner Consumption
• Replace the Toner Cartridge
161
To Next Page
Loading...
Need help?
General