Make sure you put the toner cartridge in correctly or it may separate from the drum unit.
8. Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and right to left
several times.
Be sure to return the tab to the Home position (a). The arrow on the tab must be aligned with the arrow on
the drum unit. If it is not, printed pages may have a vertical stripe.
9. Install the toner cartridge and drum unit assembly back into the machine.
10. Close the front cover of the machine.
• Do not turn off the machine or open the front cover until the machine returns to Ready Mode.
• The toner cartridge that comes with your Brother machine is a Starter toner cartridge.
• It is a good idea to keep a new toner cartridge ready for use when you see the Toner Low warning.
• To ensure high quality printing, we recommend using only Genuine Brother Brand toner cartridges.
When you want to buy toner cartridges, contact Brother Customer Service.
• DO NOT unpack the new toner cartridge until you are ready to install it.
• If a toner cartridge is left unpacked for a long time, the toner life will be shortened.
• Brother strongly recommends you DO NOT refill the toner cartridge provided with your machine. We
also strongly recommend you continue to use only Genuine Brother Brand replacement toner
cartridges. Use or attempted use of third party toner and/or cartridges in the Brother machine may
cause damage to the machine and/or may result in unsatisfactory print quality. Our limited warranty
coverage does not apply to any problem that is caused by the use of third party toner and/or cartridges.
To protect your investment and obtain premium performance from the Brother machine, we strongly
recommend the use of Genuine Brother Supplies.
Related Information
• Replace Supplies
Related Topics:
• Improve the Print Quality
183
To Next Page
Loading...
Need help?
General