Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set
Auto Power Off Mode
Set Auto Power Off Mode
If the machine is in Deep Sleep Mode for certain length of time, based on your model and settings, the machine
will go into Power Off Mode automatically. The machine does not go into Power Off Mode when the machine is
connected to a network.
• To start printing, press on the control panel and then send a print job.
Select how long the machine must be in Deep Sleep Mode before it goes into Auto Power Off Mode.
1. Press a or b to display the [General Setup] option, and then press OK.
2. Press a or b to display the [Ecology] option, and then press OK.
3. Press a or b to select the [Auto Power Off] option, and then press OK.
4. Press a or b to select the option you want, and then press Go.
Related Information
• General Settings
202
To Next Page
Loading...
Need help?
General