Brother HL-L3210CW - Page 326

Level 1 Level 2 Level 3 Level 4 Descriptions
Wi-Fi
Direct
Status Info. Signal
- Display the current Wi-Fi Direct network signal
strength.
When your machine acts as Group Owner, the
LCD always displays Strong.
Channel
- Display the channel in use when the Status is
G/O Active or Client Active.
Speed
- Display the connection speed when the Status is
G/O Active or Client Active.
I/F Enable
- - Enable or disable the Wi-Fi Direct connection.
Network
Reset
- - - Restore all network settings of your machine to the
factory settings.
1
On connection to the network, if the machine's ‘Boot Method’ is ‘Auto’ the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the ‘Boot Method’ of the machine is set to ‘Static’, you must manually enter an IP address from the machine's control panel.
[Print Reports]
Level 1
Level 2 Description
Printer Settings
- Print the Printer Settings page.
Network Config
- Print the Network Configuration Report.
Print File List
(Available only for certain models)
- Print a list of data saved in the memory.
Drum Dot Print
- Print the Drum Dot Check Sheet.
WLAN Report
(For wireless models)
- Print the wireless LAN connectivity diagnosis result.
[Machine Info.]
Level 1
Level 2 Description
Serial No.
- Display the machine's serial number.
Firmware Version
- Check your machine's firmware version.
Page Counter
- Display the total printed pages.
Parts Life
1
Toner
Display the remaining life of each toner.
Drum
Display the remaining life of each drum unit.
Belt
Display the remaining life of the belt unit.
Fuser
Display the remaining life of the fuser unit.
PF Kit 1
Display the remaining life of the PF Kit 1.
1
Life is approximate and may vary by type of use.
[Initial Setup]
Level 1
Level 2 Description
Reset Machine Reset
Restore all the machine settings that you have changed.
Network Reset
Restore all network settings back to the factory settings.
Factory Reset
Restores all the machine's settings to the factory defaults. Perform this
operation when you dispose of your machine.
Local Language
- Select the LCD language for your country.
321