Brother HL-L5100DN - Page 59

2-33
Confidential
No HUB Support No HUB Support. A USB device with a built-in hub is
connected.
--- 4.11.3
No Paper
- Detected that there was no paper
set in all trays when TrayAuto was
selected for printing.
9309 2-79
No Paper T1 Detected that there was no paper
set in the paper tray 1 when
printing from the paper tray 1.
--- 4.2.1
No Paper T2 Detected that there was no paper
set in the paper tray 2 when
printing from the paper tray 2.
--- 4.2.1
No Paper T3 Detected that there was no paper
set in the paper tray 3 when
printing from the paper tray 3.
--- 4.2.1
No Paper T4 Detected that there was no paper
set in the paper tray 4 when
printing from the paper tray 4.
--- 4.2.1
No Paper T5 Detected that there was no paper
set in the paper tray 5 when
printing from the paper tray 5.
--- 4.2.1
No Paper Fed T1 Reload paper in Tray
1, then press [Retry].
When printing from the paper tray
1, the T1 paper feed sensor does
not detect paper pass within the
specified time while the T1 paper
empty sensor detects some paper
set.
7301 2-57
No Paper Fed T2 Reload paper in Tray
2, then press [Retry].
When printing from the paper tray
2, the T2(LT or TT) paper feed
sensor does not detect paper pass
within the specified time while the
T2(LT or TT) paper empty sensor
detects some paper set.
7401 2-58
No Paper Fed T3 Reload paper in Tray
3, then press [Retry].
When printing from the paper tray
3, the T3(LT or TT) paper feed
sensor does not detect paper pass
within the specified time while the
T3(LT or TT) paper empty sensor
detects some paper set.
7501 2-60
No Paper Fed T4 Reload paper in Tray
4, then press [Retry].
When printing from the paper tray
4, the T4(LT or TT) paper feed
sensor does not detect paper pass
within the specified time while the
T4(LT or TT) paper empty sensor
detects some paper set.
7601 2-62
Error message
Description
Error
codes
Refer
to:
First line Second line