Brother HL-L9200CDW - Page 170

3-29
Confidential
(4) Disconnect the Electrode terminal of the Main body from the Electrode terminal of the
Fuser unit.
Fig. 3-18
(5) Remove the two Taptite pan B M4x14 screws to remove the Fuser unit from the Main body.
Fig. 3-19
Fuser unit
Electrode terminal of the
Main body
Electrode
terminal
Main body
Fuser unit
of the
<Back side>
Taptite pan B M4x14
Fuser unit
Main body
Taptite pan B M4x14
<Back side>