Brother HL-L9200CDW - Page 205

3-64
Confidential
(2) Remove the two Screw bind M3x6 screws and remove the Main PCB ASSY from the
Process drive unit.
Fig. 3-73
Note:
Note that the tightening torque is different between the upper side and lower side of
the Screw bind M3x6.
Upper side: 0.5±0.1 N
·m
Lower side: 0.8±0.1 N
·m
Main PCB ASSY
Process drive unit
2a
2b
<Back side>
(Upper side)
(Lower side)
Screw bind M3x6
Screw bind M3x6