Brother HL-L9200CDW - Page 383

7-34
Confidential
(6) Turn the MP separation pad ASSY upright to remove it from the MP upper cover ASSY.
Fig. 7-56
(7) Remove the MP separation pad spring from the two Pins of MP upper cover ASSY.
Fig. 7-57
(8) After replacing the PF kit MP, reset the counter.
(Refer to “1.3.29 Reset counters for parts (Function code 88)” in Chapter 5.)
MP separation pad ASSY
Pin
Pin
MP separation pad ASSY
Pin
6a
MP upper cover ASSY
6b
MP separation pad spring
Pin
MP upper cover ASSY