Brother HL-L9200CDWT - Page 104

General Information
95
3
Level 1 Level 2 Level 3 Options Descriptions
Print Menu Emulation - Auto* / HP LaserJet /
BR-Script 3
Chooses the emulation
mode you use.
Auto Continue - On* / Off Select this setting if you
want the machine to clear
paper size errors.
Output Color - Auto* / Color / Monochrome Sets the output colour.
Paper Type - Plain Paper* / Thick
Paper / Thicker
Paper /Thin
Paper /Recycled Paper /
Bond Paper / Label Paper /
Envelope / Env. Thick /
Env. Thin / Glossy Paper
Sets the type of paper.
Paper Size - A4* / Letter / B5(JIS) /
B5(ISO) / A5 / A5(Long
Edge) / A6 / Executive /
Legal / Folio / Com-10 /
Monarch / C5 / DL / 3"x5"
Sets the size of paper.
Copies - 1* / 2 / ... / 999 Sets the number of printed
pages.
Orientation -
Portrait* / Landscape This machine can print
pages in portrait or
landscape orientation.
Print Position X Offset -500 / -499 / ... / -1 / 0* / 1 /
... / 499 / 500dot(s)
Moves the print start
position (at the top-left
corner of pages)
horizontally up to -500
(left) to +500 (right) dots in
300 dpi.
Y Offset -500 / -499 / ... / -1 / 0* / 1 /
... / 499 / 500dot(s)
Moves the print start
position (at the top-left
corner of pages) vertically
up to -500 (up) to +500
(down) dots in 300 dpi.
Auto FF - On / Off* Allows the machine to print
any remaining data
automatically.
The factory settings are shown in Bold with an asterisk.