General Information
114
3
Auto Power Off 3
If the machine is in Deep Sleep mode for a certain length of time, it will go into Power Off mode. To start
printing, press on the Touchpanel, and then send the print job.
You can choose how long the machine must be in Deep Sleep mode before it goes into Auto Power Off mode,
by following these steps:
a Press .
b Press General Setup > Ecology > Auto Power Off.
c Choose the length of time (Off, 1hour, 2hours, 4hours or 8hours) the machine will remain idle
before entering Auto Power Off mode, and then press it.
d Press .
The machine does not go into Power Off mode when the machine is connected to a wired or wireless
network or has secure documents in the memory.
To Next Page
Loading...
