Brother HL-L9200CDWT - Secure Function Lock 3.0

General Information
111
3
Turning Setting Lock on/off 3
If you enter the wrong password when following the instructions below, the Touchscreen displays Wrong
Password. Enter the correct password.
Turning Setting Lock on
a Press .
b Press General Setup > Setting Lock > Lock OffOn.
c Enter the registered four-digit password using the keyboard on the machine's Touchscreen, and then
press OK.
Turning Setting Lock off
a Press on the Touchscreen.
b Enter the registered four-digit administrator password using the keyboard on the machine's
Touchscreen.
Press OK.
Secure Function Lock 3.0 3
Use Secure Function Lock to configure passwords, set specific user page limits, and grant access to some
or all of the operations listed here. You can configure and change the following Secure Function Lock 3.0
settings using Web Based Management or BRAdmin Professional 3 (Windows
®
):
 Print
1
 USB Direct Print
 Web Connect (Download)
2
 Colour Print
12
 Page Limit
2
1
Print and Colour Print include print jobs via Google Cloud Print and Brother iPrint&Scan.
2
Available for Print, USB Direct Print and Web Connect (Download).
NOTE
• Make a careful note of your password. If you forget it, you must reset the password stored in the machine.
For information about how to reset the password contact Brother customer service or your local Brother
dealer.
• Only administrators can set limitations and make changes for each user.