Brother HL-L9200CDWT - Replacing Periodic Maintenance Parts

Routine Maintenance
170
5
Replacing periodic maintenance parts 5
The periodic maintenance parts must be replaced regularly to maintain print quality. The parts listed below
must be replaced after printing approximately 50,000 pages
1
for PF Kit MP and 100,000 pages
1
for PF Kit
1, PF Kit 2, Fuser and Laser.
Please contact your local Brother dealer or Brother customer service when the following messages appear
on the Touchscreen:
1
A4 or Letter size single-sided pages.
2
Life of part is approximate and may vary by type of use.
3
If the optional lower tray (standard equipment) is installed.
Touchscreen message Description
Replace Fuser
2
Replace the fuser unit.
Replace Laser
2
Replace the laser unit.
Replace PF Kit 1
2
Replace the paper feeding kit for the paper tray.
Replace PF Kit 2
23
Replace the paper feeding kit for the lower tray (option).
Replace PF Kit MP
2
Replace the paper feeding kit for the multi-purpose tray.