EasyManua.ls Logo

Brother HL-L9200CDWT - Page 143

Brother HL-L9200CDWT
227 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Routine Maintenance
134
5
Replacing the drum unit 5
IMPORTANT
While removing the drum unit, handle it carefully because it may contain toner. If toner scatters on your
hands or clothes, immediately wipe or wash it off with cold water.
Every time you replace the drum unit, clean the inside of the machine (see Cleaning and Checking the
machine on page 153).
When you replace the drum unit with a new one, follow these steps, and then reset the drum counter by
following the instructions included with the new drum unit.
a Make sure that the machine is turned on.
b Press the front cover release button and pull open the front cover.
c Hold the blue handle of the drum unit. Pull the drum unit out until it stops.

Table of Contents

Related product manuals