Name: Brother Homelock 1034D
Brand: Brother
Rating: 4 (1 reviews)

To Next Page

To Previous Page

-6-

 ,! #*&#+&

How to use the gauge

1. Raise the presser bar and remove the presser foot and presser foot holder.

2. Lower the needle bar to its lowest position.

3. Position the spacer and gauge and tighten the screw.

4. Remove the spacer.

5. Raise the needle bar until the needle clamp contacts the gauge. Continue making the adjustment

described on the previous page. (The spacer is 2.4 mm thick.)

www.promelectroavtomat.ru

Questions and Answers:

Need help?

Do you have a question about the Brother Homelock 1034D and is the answer not in the manual?

Brother Homelock 1034D Specifications

General