SEWING THE STITCHES
Utility Stitches
Sewing S-63
S
2
e
Use the eyelet punch to make a hole in the
center of the stitching.
Multi-directional Sewing
(Straight Stitch and Zigzag Stitch)
Use these stitch patterns to attach patches or
emblems to pant legs, shirt sleeves, etc.
a
Remove the flat bed attachment to use the
free-arm.
b
Select and attach monogramming foot
“N”.
c
Set the needle in the fabric at the sewing
start point, and sew seam “1” as shown.
a Start Point
d
Select and sew seam “2” as shown.
* The fabric will move sideways, guide the fabric by
hand to keep sewing straight.
e
Select and sew seam “3” as shown.
→ The fabric feeds forward while stitching backward.
• Insert the tubular piece of fabric onto the
free-arm, and then sew in the order shown
in the illustration.
• For details on each stitch, refer to the
“STITCH SETTING CHART” on page S-67.
To Next Page
Loading...
Need help?
General
