Brother Innov-is NV55P - Adjusting the Brightness of the LCD

Changing the Machine Settings 21
1
—
— — — — — — — — — — — — — — — — — — —
—
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Adjusting the brightness of
the LCD
The brightness of the LCD can be adjusted.
a
Press (Settings key) in the operation
panel, and then press or (Stitch length
keys) until is displayed.
X The screen for changing the brightness of the
LCD appears.
b
To make the LCD brighter, press (Stitch
width key). To make the LCD darker, press
(Stitch width key).
X The brightness of the LCD is changed.
c
Press (OK key) or (Cancel/clear
key).
X The initial stitch screen appears again.