Brother Innov-is NV55P - Cutting the Thread

SEWING BASICS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
—
56
Cutting the thread
When you have finished sewing, cut the threads with
the thread cutter on the side of the machine.
a
When you wish to finish the stitching and the
sewing machine is stopped, if the needle is not
raised, press (needle position button) once
to raise the needle.
a Needle position button
X The needle is raised.
b
Raise the presser foot lever.
a Presser foot lever
c
Pull the fabric to the left side of the machine,
and then pass the threads through the thread
cutter to cut them.
a Thread cutter
a
a