Brother JS2135 User Manual

KNOWING YOUR SEWING MACHINE ————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
—
————————————————————————————————————————————————
—————
11
THREADING THE MACHINE
Winding the bobbin
CAUTION
1
Pull up the spool pin and put a spool of
thread on this pin.
2
While holding the thread from the spool
with your right hand, pass the thread
toward you, in the groove on the thread
guide. Then, pass the thread around the
pre-tension disk and pull the thread in
completely.
CAUTION
● We designed the bobbin that comes with this machine. If you use bobbins from other models,
the machine will not work properly. Only use the bobbin that comes with this machine or
bobbins of the same type (part code: SA156, SFB: XA5539-151). Using other bobbins may
cause damage to the machine.
Actual size
11.5 mm
(7/16 inch)
This model Other models
1 Pre-tension disk 2 Bobbin winder shaft 3 Bobbin
3
2
1
1 Pull the thread
in completely.
● If the spool of thread is in the wrong
place, or is set incorrectly, the thread
may tangle on the spool pin.

Brother JS2135 Specifications

General

Type	-
Display	No
Handle(s)	Yes
Sewing speed	750
Stitch width	5 mm
Product color	Green, White
Stitch length	4 mm
Buttonhole type	4 Step
Number of programs	35
Number of button holes	1
Sewing machine functions	Embroidery, Overlock, Sewing
Number of stitch patterns	14
Sewing machine accessories included	Button sewing foot, Buttonhole foot, Zigzag foot, Zipper foot

Weight and Dimensions

Depth	392 mm
Width	148 mm
Height	308 mm
Weight	4900 g