Brother KE100 Motor Drive User Manual

Contents
Names of Parts 1
How to Assemble the Motor Driving Unit 3
Function of Each Part 12
1. Name of Part 12
2. Explanation of Each Part 12
Operation Step 18
Warn ing 19
When you use Double bed colour changer 20
This knitting machine is for home use.
IIIMPORTANT SAFETY INSTRUCTIONS"
"When using an electrical appliance, basic
safety precautions should always be fol-
lowed, including the following:"
"Read all instructions before using (this ap-
pliance)."
I'DANGER - To reduce the risk of
electric shock:"
1. "An appliance should never be left unat-
tended when plugged in. Always unplug this
appliance from the electric outlet immediately
after using and before cleaning."
IIWARNING - To reduce the risk
of burns, fire, electric shock, or injury to per-
sons:"
1. "Do not allow to be used as a toy. Close
attention is necessary when this appliance is
used by.or near children."
2. "Use this appliance only for its intended
use as described in this manual. Use only at-
tachments recommended by the manufac-
turer as contained in this manuaL"
3. "Never operate this appliance if it has a
damaged cord or plug, if it is not working
properly, if it has been dropped or damaged,
or dropped into water. Return the appliance
to the nearest authorized dealer or service
center for examination, repair, electrical or
mechanical adjustment."
4. "Never operate the appliance with the air
openings blocked. Keep the air openings free
of lint, hair, loose clothes and the like."
5. "Never drop or insert any object into any
opening."
6. "Do not use outdoors."
7. "Do not operate where aerosol (spray)
products are being used or where oxygen is
being administered."
8. "To disconnect, turn all controls to the off
("a") position, then remove plug from outlet."
9. "Do not unplug by pulling on cord. To un-
plug, grasp the plug, not the cord."
10. "Do not approach too close to the car-
riage while it is moving."
"SAVE THESE INSTRUCTIONS"

Brother KE100 Motor Drive Specifications

General

Brand	Brother
Model	KE100 Motor Drive
Category	Sewing Machine
Language	English

Summary

Names of Parts

Tools

Lists and illustrates various tools required for the knitting machine assembly and operation.

How to Assemble the Motor Driving Unit

Assembling the Stand

Guides the user through the initial steps of assembling the knitting machine's support stand.

Assembling the Brackets

Details the process of attaching the machine's brackets to the main structure.

Assembling the Rail

Explains how to correctly assemble and attach the machine's rail component.

Assembling the Motor Head

Provides instructions for assembling the motor head unit onto the machine.

Adjusting the Tension of Driving Belt

Guides users on how to properly adjust the tension of the driving belt for optimal performance.

Assembling the Belt Cover

Details the steps for assembling and securing the belt cover onto the machine.

Initial Setting of Operation Range Sensor

Explains the crucial initial setting procedure for the operation range sensor.

Assembling the Coupler

Provides instructions on how to assemble and attach the coupler mechanism.

Assembling the Joint

Details the assembly process for the joint component, varying by model.

Installing the Knitting Machine

Guides on how to properly install the knitting machine onto its stand using table clamps.

Assembling Motor Stop Sensor and Tension Rod Stabilizer

Instructs on assembling the motor stop sensor and tension rod stabilizer.

Assembling the Yarn Tension Unit

Details the procedure for assembling and attaching the yarn tension unit.

Inserting the Plug

Explains how to correctly insert the power and sensor plugs into the machine.

Using the Cord Hook

Provides instructions on how to use the cord hook to manage machine cables.

Function of Each Part

Component Identification

Identifies and labels key machine components for user reference.

Electrical Power System

Explains the proper use and operation of the electrical power supply and switch.

Direction Indicator System

Describes how the direction indicator lamps signal shuttle movement and abnormal conditions.

Speed Change Mechanism

Details how to adjust the machine's operating speed using the speed change knob.

Row Counter Functionality

Explains how to set the row counter for automatic motor stop after knitting a specified number of rows.

Operation Range Adjustment

Guides users on setting the shuttle's operational range for optimal knitting.

Operation Modes and Control

Explains continuous and intermittent operation modes and foot switch control.

Coupler Mechanism

Details the coupler's role in preventing damage during jams and its torque adjustment.

Yarn Sensor Operation

Explains how the yarn sensor detects yarn run-out and stops the operation.

Operation Step

Preparation for Knitting

Outlines the necessary preparations before starting the knitting process.

Preparation for Operating

Details the steps required to prepare the machine for operation after assembly.

Initiating Operation

Explains the final step to start the knitting operation using the machine's controls.

Warning

When you use Double bed colour changer